CEILING CANOPIES

Our 50mm diameter canopies are spun 20mm high. Being a small canopy the mounting bracket is not fitted with a block connector because of the limited space. 

Available in ALUMINIUM and limited stock in BRASS.

Click on the image for the data sheet.

We have two heights available in the 60mm diameter canopies, 40mm and 20mm high. The 20mm high canopy does not allow enough space to house a block connector. 

Available in ALUMINIUM.

Click on the image for the data sheet. 

We have various options with the 80mm diameter canopies. 70mm high, 25mm high, cone shaped and with an extra hole for a suspension wire clamp if required.

Available in ALUMINIUM and the 80mm x 25mm available in BRASS and COPPER.

Click on the image for the data sheet.

Elettra has three variations of the 100mm diameter canopy.  30mm deep,  50mm deep and 80mm deep in a dome shape.

Available in ALUMINIUM and the 30mm deep canopy available in BRASS and COPPER.

The 120mm  diameter canopies have been manufactured in three different heights. 25mm, 55mm and 100mm high. The 100mm high canopy does not come with a 10.5mm centre hole unlike the other two variations. 

Available in ALUMINIUM

Click on the image for the data sheet.

The 150mm Diameter canopy is a 55mm deep canopy allowing the option to house drivers or transformers. It could also hang more than one fitting if needed. 

Available in ALUMINIUM and limited stock in BRASS.

Click on the image for the data sheet.

We have two options available in the 190 mm diameter ceiling canopies. 55mm deep and 30mm deep suitable for various applications 

Available in ALUMINIUM

Elettra has two sizes available in the 250mm diameter ceiling canopy. 60mm and 30mm deep big enough to hang numerous pendants or house a large driver.

Available in ALUMINIUM

The 300mm x 30mm ceiling canopy comes standard with 4 fixing screws that attach it to the ceiling mounting plate. Making it a very strong set up, able to suspend heavier pendants if needed. 

Now available 300mm x 50mm

Avaliable in ALUMINIUM

The 400mm x 35mm ceiling canopy comes standard with 4 fixing screws that attach it to the ceiling mounting plate. Making it a very strong set up, able to suspend multiple pendants if needed. 

Available in ALUMINIUM

The 500mm x 40mm ceiling canopy comes standard with 4 fixing screws that attach it to the ceiling mounting plate. Making it a very strong set up, able to suspend heavier multiple pendants if needed. 

Available in ALUMINIUM

The 600mm x 40mm ceiling canopy comes standard with 4 fixing screws that attach it to the ceiling mounting plate. Making it a very strong set up, able to suspend heavier multiple pendants if needed. 

Available in ALUMINIUM

The 800mm x 50mm ceiling canopy comes standard with 4 to 6 fixing screws that attach it to the ceiling mounting plate. Making it a very strong set up, able to suspend numerous heavier pendants if needed. 

Available in STEEL

The 1000mm x 50mm ceiling canopy comes standard with 6 to 8 fixing screws that attach it to the ceiling mounting plate. Making it a very strong set up, able to suspend heavier numerous pendants if needed. 

Available in STEEL

The 80mm square canopy and the 80mm x 50mm square canopy are manufactured 25mm high. Both square canopies come standard with a 10.5mm DIA centre hole and can be powder coated to your required finish.

Available in ALUMINIUM, limited stock.

The 50 x 25mm and 50 x 50mm linear canopy are not a stocked item. Each linear canopy will be manufactured and finished to your required length and with enough holes to suit any pendants or suspensions being hung from the canopy.

Available ALUMINIUM, BRASS and COPPER

The 80 x 25mm linear canopy is not a stocked item. Each linear canopy will be manufactured and finished to your required length and with enough holes to suit any pendants or suspensions being hung from the canopy.

Available ALUMINIUM, BRASS and COPPER

If you are after a  particular, length, depth, width, shape or crazy hole layout for your ceiling or wall canopy. Contact us and we can provide you with a quote and drawings if needed.

Custom canopies can be made from STEEL, ALUMINIUM, BRASS or COPPER and finished to suit your project.

Any of Elettra's canopies can be  modified to suit the application. Talk to us about your requirements to make your canopy more suitable for your application. Photos show a canopy  with a shadow plate and a canopy with a conduit cut out. Many more possibilities can be discussed.